• Complete product family for all kind of applications.
• Hand thread, easier mounting at site.
• Certified Product by the most stringent certification bodies.
• Insulating material: halogen free.
• High tensile strength.
Cable ties
• For outdoor and indoor installations.
* The values indicated according to IEC 62275 have been tested under the equivalent standard EN 62275.
BS EN 62275 is the UK implementation of EN 62275 and IEC 62275.
See updated technical information
of each part number on
• 14 sizes of cable ties to cover a diameter scope from 1.6 mm to 362 mm.
• High tensile strength acc./IEC 62275*.
• Good performance at low temperatures.
* The values indicated according to IEC 62275 have been tested under the equivalent standard EN 62275.
BS EN 62275 is the UK implementation of EN 62275 and IEC 62275.
Easy mounting and smooth threading
Unex cable ties are easy to thread, allowing quick and effortless manual assembly. Finger-friendly rounded ends.
Insulating locking mechanism
Highly resistant, assures easy fixing and tightening of the cable tie.
Inside teeth
Inside flush teeth, assuring tightening and protecting the cable jacket.
Quality marks
The quality of Unex cable ties is recognized by the most stringent quality marks and approvals.
UL approval both for raw material and finished product.
Quality marks
Approvals:
See updated quality marks of each part number on www.unex.net
Unex has completed the cable ties product family with 2 new big sizes: 12.7x1000 mm. and 12.7x1200 mm., for special applications in which a large tying diameter is required. All sizes are available in our stock.